Skip to main content

AD6021 No 21 Black Gloss - Modellers Spray 150 ML

$7.99

Out of stock
Item code:
AD6021

Earn up to 80 Hobby Points
with this purchase

Product Info

Usage: A solvent-based, fast-drying paint developed for use on plastic model kits but which can also be used on other substrates.
Matt, Satin, Gloss, Metallic and Clear finishes are available.

Substrate: A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster and sealed hardboard. Also most applications in general DIY and automotive. Always try on a small test area to check suitability.


Coverage: Depends on application and thickness of coats.


Application: Aerosol spray. Spray at least 25cm from the substrate and spray with an even back and forth action.


Drying Time: 15-30 minutes


How To Clean: Hold can upside down after use and depress nozzle for a few seconds to clean. Can be removed if not fully dry with Humbrol Acrylic Thinner. Product is permanent once dry.

What's Inside

1x Modellers spray

Recommended For You

Tech Specs

How many pieces will be found in the box opened by the customer?
1
Item Scale
No Scale
Batteries Required
No
Item Length - Without Packaging (cm)
5.2
Item Height - Without Packaging (cm)
14.8
Item Width - Without Packaging (cm)
5.2
Finish
Gloss
Finish
Gloss
Product Volume in Millilitres (If applicable)
Metal tins 150ml

EN | Danger | Contains acetone. Repeated exposure may cause skin dryness or cracking. Extremely flammable aerosol. Pressurised container: May burst if heated. Causes skin irritation. Causes serious eye irritation. May cause drowsiness or dizziness. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Avoid breathing vapours. Use only outdoors or in a well-ventilated area. Wear protective gloves/eye protection. IF ON SKIN: Wash with plenty of water. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. Call a POISON CENTER/ doctor if you feel unwell. If skin irritation occurs: Get medical advice/attention. If eye irritation persists: Get medical advice/attention. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122°F.