AC5008 No 27001 Aluminium Metalcote
Product Info
Humbrol has been the modelers standard for decades. Originally produced in a small range of colors for painting bike frames, it now comes in over 80 colors, and is perfect for modelers wishing to see a high quality and tough finish on their creations. Humbrol enamel can also be used on a wide range of art and craft applications, on many surfaces and as a touch up or surface paint around the home and for DIY applications. Suitable for indoor or outdoor usage.
Usage:
A solvent-based, fast-drying paint developed for use on plastic model kits but can also be used on other substrates.
Substrate:
A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more. Always try on a small test area first to check suitability.
Coverage:
14ml tin covers approx. 0.3m² depending on thickness of application.
Application:
Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note: Metalcote colors are designed to be polished when fully dry.
Drying time: Metalcote: 1-2 hours touch dry; up to 24 hours for hard dry. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (advisement is to leave overnight).
How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry.
Usage:
A solvent-based, fast-drying paint developed for use on plastic model kits but can also be used on other substrates.
Substrate:
A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster, sealed hardboard and more. Always try on a small test area first to check suitability.
Coverage:
14ml tin covers approx. 0.3m² depending on thickness of application.
Application:
Brush straight from the tin. Airbrush with a suitable thinner such as Humbrol Enamel Thinners. Two thin coats are preferable to one thick coat. The usual thinning ratio is 2 parts paint to 1 part thinner. Note: Metalcote colors are designed to be polished when fully dry.
Drying time: Metalcote: 1-2 hours touch dry; up to 24 hours for hard dry. Drying times will vary according to ambient temperature and humidity. Recoat: 6 hours minimum (advisement is to leave overnight).
How to clean: Brushes: use Humbrol Enamel Thinners. Airbrush: flush thoroughly using Humbrol Enamel Thinners. Product is permanent once dry.
What's Inside
1x Enamel tinlet
Recommended For You
Tech Specs
- How many pieces will be found in the box opened by the customer?
- 1
- Item Scale
- No Scale
- Batteries Required
- No
- Item Length - Without Packaging (cm)
- 3.2
- Item Height - Without Packaging (cm)
- 2.8
- Item Width - Without Packaging (cm)
- 3.2
- Finish
- Metallic
- Product Volume in Millilitres (If applicable)
- Metal tinlets of paint 14ml
EN | Danger | Contains isopropanol. Isobutyl methacrylate. Hydrocarbons, C9 aromatics. Hydrocarbons, C9-C11, n-alkanes, isoalkanes, cyclics, < 2% aromatics. May be fatal if swallowed and enters airways. May cause an allergic skin reaction. May cause respiratory irritation. May cause drowsiness or dizziness. Harmful to aquatic life with long lasting effects. Keep out of reach of children. Avoid breathing vapours. Wash hands thoroughly after handling. Use only outdoors or in a well-ventilated area. IF ON SKIN: Wash with plenty of water. If skin irritation occurs: Get medical advice/attention. Dispose of contents/container in accordance with local regulations.