AD6067 No 67 Tank Grey - Modellers Spray 150 ML
Product Info
Matt, Satin, Gloss, Metallic and Clear finishes are available.
Substrate: A wide range of surfaces including most plastics, wood, glass, ceramics, metal, cardboard, sealed plaster and sealed hardboard. Also most applications in general DIY and automotive. Always try on a small test area to check suitability.
Coverage: Depends on application and thickness of coats.
Application: Aerosol spray. Spray at least 25cm from the substrate and spray with an even back and forth action.
Drying Time: 15-30 minutes
How To Clean: Hold can upside down after use and depress nozzle for a few seconds to clean. Can be removed if not fully dry with Humbrol Acrylic Thinner. Product is permanent once dry.
What's Inside
Recommended For You
Tech Specs
- How many pieces will be found in the box opened by the customer?
- 1
- Item Scale
- No Scale
- Batteries Required
- No
- Item Length - Without Packaging (cm)
- 5.2
- Item Height - Without Packaging (cm)
- 14.8
- Item Width - Without Packaging (cm)
- 5.2
- Finish
- Matt
- Product Volume in Millilitres (If applicable)
- Metal tins 150ml
EN | Danger | Contains acetone. Repeated exposure may cause skin dryness or cracking. Warning! Hazardous respirable droplets may be formed when sprayed. Do not breathe spray or mist. Extremely flammable aerosol. Pressurised container: May burst if heated. Causes serious eye irritation. May cause drowsiness or dizziness. Keep out of reach of children. Keep away from heat, hot surfaces, sparks, open flames and other ignition sources. No smoking. Do not spray on an open flame or other ignition source. Do not pierce or burn, even after use. Use only outdoors or in a well-ventilated area. Wear protective gloves/eye protection. IF IN EYES: Rinse cautiously with water for several minutes. Remove contact lenses, if present and easy to do. Continue rinsing. IF INHALED: Remove person to fresh air and keep comfortable for breathing. If eye irritation persists: Get medical advice/attention. Protect from sunlight. Do not expose to temperatures exceeding 50 °C/122°F. Dispose of contents/container in accordance with local regulations.